Accessories

​​​​​​​​​​​​​​​​
Fire-Lite offers addressable plug-in photoelectric and thermal detectors that use a state-of-the art technology with communications to provide open area protection that are used exclusively with Fire-Lite’s Addressable Fire Alarm Control Panels (FACPs).​

Since these detectors are addressable, they help emergency personnel quickly locate a fire during its early stages, potentially saving precious rescue time while also reducing property damage. Two LEDs on each sensor light to provide a local, visible sensor indication. 

ACM-8RF

The ACM-8RF is a relay module in the AFM Series of annunciators. It provides the MS-9200, MS-9200UD, MS-9200UDLS 198-point Addressable Fire Alarm Control Panel, the MS-9600 636-point Intelligent Addressable Fire Alarm Control Panel, and MS-5210UD 10-zone Fire Alarm Control/Communicator with relay-by-zone capability for elevator recall, HVAC control, etc.
The ACM-8RF is a relay module in the AFM Series of annunciators. It provides the MS-9200, MS-9200UD, MS-9200UDLS 198-point Addressable Fire Alarm Control Panel, the MS-9600 636-point Intelligent Addressable Fire Alarm Control Panel, and MS-5210UD 10-zone Fire Alarm Control/Communicator with relay-by-zone capability for elevator recall, HVAC control, etc.

ACS-Series

The ACS-Series Annunciator and Control System provides arrays of LEDs to indicate point status, zone status, system status, and ability to perform system reset, silence, acknowledge and drill. The ACS Series provides the Fire-Lite system (For the MS-9200, MS-9200UD, MS-9200UDLS, MS-9600LS, MS-9600UDLS) with up to 32 remote serially connected annunciators, each with a capacity of 64 points, for a total capacity of up to 99 zones or 636 points.  These modules use a serial communications interface, and may be located up to 6,000 feet from the panel.
The ACS-Series Annunciator and Control System provides arrays of LEDs to indicate point status, zone status, system status, and ability to perform system reset, silence, acknowledge and drill. The ACS Series provides the Fire-Lite system (For the MS-9200, MS-9200UD, MS-9200UDLS, MS-9600LS, MS-9600UDLS) with up to 32 remote serially connected annunciators, each with a capacity of 64 points, for a total capacity of up to 99 zones or 636 points. These modules use a serial communications interface, and may be located up to 6,000 feet from the panel.

ANN-I/O

The ANN-I/O is an LED driver module that can be used in a wide variety of applications including as an interface with the Fire Alarm Control Panel (FACP) to drive most customized graphic annunciators. It comes in a plastic enclosure that may be mounted inside a custom annunciator or accessory cabinet and can drive up to 40 LEDs.
The ANN-I/O is an LED driver module that can be used in a wide variety of applications including as an interface with the Fire Alarm Control Panel (FACP) to drive most customized graphic annunciators. It comes in a plastic enclosure that may be mounted inside a custom annunciator or accessory cabinet and can drive up to 40 LEDs.

ANN-LC

The ANN-LC (Lite-Connect) is a solution that allows building owners reduce the number of phone lines by consolidating the central station communications to a single MS-9050UD fire alarm control panel. Using fiber-optic technology, the panels are connected together and the MS-9050UD sends point or zone information to the Central Station for the entire system. In addition, a building to building connection with fiber-optic cable avoids potential ground fault issues and damage caused by lightning strikes.
<p><a href="https://pages1.honeywell.com/HLS-FLSK-20140731-Form-Lite-Connect_Sales_Contact.html" target="_blank"><img src="http://www.firelite.com/en-US/PublishingImages/but-contact_sales-red.png" width="110" height="38"></a></p>
The ANN-LC (Lite-Connect) is a solution that allows building owners reduce the number of phone lines by consolidating the central station communications to a single MS-9050UD fire alarm control panel. Using fiber-optic technology, the panels are connected together and the MS-9050UD sends point or zone information to the Central Station for the entire system. In addition, a building to building connection with fiber-optic cable avoids potential ground fault issues and damage caused by lightning strikes.

ANN-LED

The ANN-LED annunciator module provides LED annunciation of general system faults and input zones/points when used with a compatible Fire Alarm Control Panel (FACP). The ANN-LED module provides alarm (red), trouble (yellow) and supervisory (yellow) indication for up to ten input zones or addressable points. ANN-RLED has red LEDs only for alarm communication of up to 30 addressable points.
The ANN-LED annunciator module provides LED annunciation of general system faults and input zones/points when used with a compatible Fire Alarm Control Panel (FACP). The ANN-LED module provides alarm (red), trouble (yellow) and supervisory (yellow) indication for up to ten input zones or addressable points. ANN-RLED has red LEDs only for alarm communication of up to 30 addressable points.

ANN-RLY

The ANN-RLY relay module provides 10 programmable Form- C relays when used with a compatible FACP (Fire Alarm Control Panel). The ANN-RLY module may be mounted inside the FACP main circuit board chassis, ROME or in the battery area of the enclosure using optional mounting bracket.
The ANN-RLY relay module provides 10 programmable Form- C relays when used with a compatible FACP (Fire Alarm Control Panel). The ANN-RLY module may be mounted inside the FACP main circuit board chassis, ROME or in the battery area of the enclosure using optional mounting bracket.

ANN-S/PG

The ANN-S/PG Interface module connects either a serial or parallel printer with a compatible Fire Alarm Control Panel (FACP) to print real-time logs of system events, detector status reports, and event histories. The ANN-S/PG and the FACP communicate over a two-wire serial interface employing the ANN-BUS communication format. A single four-conductor unshielded cable may be used for both power and data communications.
The ANN-S/PG Interface module connects either a serial or parallel printer with a compatible Fire Alarm Control Panel (FACP) to print real-time logs of system events, detector status reports, and event histories. The ANN-S/PG and the FACP communicate over a two-wire serial interface employing the ANN-BUS communication format. A single four-conductor unshielded cable may be used for both power and data communications.

LDM-Series

The LDM Series Lamp Driver Modules, when combined with a custom graphic display, provide annunciation and control for the MS-9200, MS-9200UD, MS-9200UDLS, MS-9600, MS-9600LS and MS-9600UDLS Fire Alarm Control Panels. These modules use a serial communications interface, and may be located up to 6,000 feet from the panel.
The LDM Series Lamp Driver Modules, when combined with a custom graphic display, provide annunciation and control for the MS-9200, MS-9200UD, MS-9200UDLS, MS-9600, MS-9600LS and MS-9600UDLS Fire Alarm Control Panels. These modules use a serial communications interface, and may be located up to 6,000 feet from the panel.

ROME

The ROME (Relay Option Module Enclosure) is shipped with one ANN-RLY Module installed. The ANN-RLY Relay Module provides ten programmable  Form-C relays when used with a compatible FACP (Fire Alarm Control Panel) using the ANN-BUS communication circuit. The ROME can be installed remotely up to 1250 feet away from the FACP location, in an Elevator, Electrical or Mechanical room reducing the wiring cost and installation time.
The ROME (Relay Option Module Enclosure) is shipped with one ANN-RLY Module installed. The ANN-RLY Relay Module provides ten programmable Form-C relays when used with a compatible FACP (Fire Alarm Control Panel) using the ANN-BUS communication circuit. The ROME can be installed remotely up to 1250 feet away from the FACP location, in an Elevator, Electrical or Mechanical room reducing the wiring cost and installation time.
SwiftPage
SWIFT Resources
Informative Technical
Sell Sheet Drawings
Overview Video Engineering Spec
Case Study: Vail Ski Championship Tech Bulletins
Value Calculator LED Indications (Gateway)
Product Images LED Indications (Detectors/Modules)
FAQ W-USB Adapter Upgrade Procedure
All SWIFT Firmware
Quick Start Guide SWIFT Tools
Link Test
Mesh Network Videos
RF Scan Technical How-To Series
Technical How-To Series
Archived Webinar SWIFT Wireless 2.0 & Applications
Applications
Tools
Lite Specs