Wireless (SWIFT)

​​​​​​​​​​​​​​​​
SWIFT wireless addressable devices provide secure, reliable communication to the Fire Alarm Control Panel (FACP) across a class A mesh network. Great for applications where it is costly, obtrusive, or possibly dangerous to use traditional wired devices.​​


W-GATE Wireless Gateway

W-GATE is the wireless fire system gateway that acts as a bridge between the fire alarm control panel (FACP) and wireless fire devices. The wireless gateway uses mesh technology to communicate with the devices and offers high reliability for commercial applications. The W-GATE can be installed anywhere on the SLC and is an excellent solution retrofits and “hard to wire” applications. Note: W-GATE must be used with an ES-200X, ES-50X, MS-9600(UD)LS or MS-9200UDLS FACP.<div>&nbsp;</div><div class="productdocdivs"><a href="http://www.firelite.com/CatalogDocuments/DF-60821.pdf" class="productdocanchor">Datasheet</a></div><div class="productdocdivs"><a href="http://www.firelite.com/CatalogDocuments/LS10036-000FL-E.pdf" class="productdocanchor">Manual</a></div><div class="productdocdivs"><a class="productdocanchor" href="http://www.firelite.com/en-us/Pages/Product.aspx?category=Wireless%20Fire%20Alarm%20Solution&cat=HLS-FIRELITE&pid=W-GATE">Learn more</a></div>
W-GATE is the wireless fire system gateway that acts as a bridge between the fire alarm control panel (FACP) and wireless fire devices. The wireless gateway uses mesh technology to communicate with the devices and offers high reliability for commercial applications. The W-GATE can be installed anywhere on the SLC and is an excellent solution retrofits and “hard to wire” applications. Note: W-GATE must be used with an ES-200X, ES-50X, MS-9600(UD)LS or MS-9200UDLS FACP.
 

W-DIS-D Wireless Display Driver

W-DIS-D is a Wireless Display Driver that is required to annunciate any wireless-specific events from the system. It receives the event information from the wireless network and then connects to a dedicated ANN-80-W for annunciation. All standard fire alarm events will report on the fire alarm control panel (FACP) just like a standard wired device. Any wireless-specific events (such as low battery), will annunciate a general trouble at the FACP and specific information on the ANN-80-W. Note: W-DIS-D is required when used with a MS-9600(UD)LS or MS-9200UDLS FACP but is not needed when used with an ES-200X and ES-50X FACP.<div>&nbsp;</div><div class="productdocdivs"><a href="http://www.firelite.com/CatalogDocuments/DF-60821.pdf" class="productdocanchor">Datasheet</a></div><div class="productdocdivs"><a href="http://www.firelite.com/CatalogDocuments/LS10036-000FL-E.pdf" class="productdocanchor">Manual</a></div><div class="productdocdivs"><a class="productdocanchor" href="http://www.firelite.com/en-us/Pages/Product.aspx?category=Wireless%20Fire%20Alarm%20Solution&cat=HLS-FIRELITE&pid=W-DIS-D">Learn more</a></div>
W-DIS-D is a Wireless Display Driver that is required to annunciate any wireless-specific events from the system. It receives the event information from the wireless network and then connects to a dedicated ANN-80-W for annunciation. All standard fire alarm events will report on the fire alarm control panel (FACP) just like a standard wired device. Any wireless-specific events (such as low battery), will annunciate a general trouble at the FACP and specific information on the ANN-80-W. Note: W-DIS-D is required when used with a MS-9600(UD)LS or MS-9200UDLS FACP but is not needed when used with an ES-200X and ES-50X FACP.
 

ANN-80-W Annunciator

ANN-80-W is a compact, backlit, 80-character LCD annunciator that can be used to annunciate wireless-specific events. It connects to the W-DIS-D Wireless Display Driver using a two-wire serial interface employing the ANN-BUS communication format. Two additional wires from the host fire alarm control panel (FACP) are required for power. Any wireless-specific events (such as low battery), will annunciate a general trouble at the FACP and specific information on the ANN-80-W. Note: ANN-80-W is required when used with a MS-9600(UD)LS or MS-9200UDLS FACP but is not needed when used with an ES-200X and ES-50X FACP.<div>&nbsp;</div><div class="productdocdivs"><a href="http://www.firelite.com/CatalogDocuments/df-52417.pdf" class="productdocanchor">Datasheet</a></div><div class="productdocdivs"><a href="http://www.firelite.com/CatalogDocuments/LS10036-000FL-E.pdf" class="productdocanchor">Manual</a></div><div class="productdocdivs"><a class="productdocanchor" href="http://www.firelite.com/en-us/Pages/Product.aspx?category=Wireless%20Fire%20Alarm%20Solution&cat=HLS-FIRELITE&pid=ANN-80-W">Learn more</a></div>
ANN-80-W is a compact, backlit, 80-character LCD annunciator that can be used to annunciate wireless-specific events. It connects to the W-DIS-D Wireless Display Driver using a two-wire serial interface employing the ANN-BUS communication format. Two additional wires from the host fire alarm control panel (FACP) are required for power. Any wireless-specific events (such as low battery), will annunciate a general trouble at the FACP and specific information on the ANN-80-W. Note: ANN-80-W is required when used with a MS-9600(UD)LS or MS-9200UDLS FACP but is not needed when used with an ES-200X and ES-50X FACP.
 

W-SD355/W-SD355T Wireless Photoelectric Smoke Detectors

W-SD355 and W-SD355T addressable, wireless photoelectric detectors use a state of the art photoelectric sensing chamber to provide open area protection. The W-SD355T adds thermal sensors that will alarm at a fixed temperature of 135⁰F (57⁰C). The W-SD355 and W-SD355T communicate with the fire alarm control panel (FACP) through a wireless mesh network to the W-GATE wireless gateway. Note: Must be used with an ES-200X, ES-50X, MS-9600(UD)LS or MS-9200UDLS FACP. <div>&nbsp;</div><div class="productdocdivs"><a href="http://www.firelite.com/CatalogDocuments/DF-60833.pdf" class="productdocanchor">Datasheet</a></div><div class="productdocdivs"><a href="http://www.firelite.com/CatalogDocuments/I56-4081-000.pdf" class="productdocanchor">Manual</a></div><div class="productdocdivs"><a class="productdocanchor" href="http://www.firelite.com/en-us/Pages/Product.aspx?category=Wireless%20Fire%20Alarm%20Solution&cat=HLS-FIRELITE&pid=W-SD355">Learn more</a></div>
W-SD355 and W-SD355T addressable, wireless photoelectric detectors use a state of the art photoelectric sensing chamber to provide open area protection. The W-SD355T adds thermal sensors that will alarm at a fixed temperature of 135⁰F (57⁰C). The W-SD355 and W-SD355T communicate with the fire alarm control panel (FACP) through a wireless mesh network to the W-GATE wireless gateway. Note: Must be used with an ES-200X, ES-50X, MS-9600(UD)LS or MS-9200UDLS FACP.
 

W-H355/W-H355R Wireless Heat Detectors

W-H355 and W-H355R addressable, wireless heat detectors use a state-of-the-art thermistor sensing circuit for a fast response. The W-H355 and W-H355R provide fixed temperature alarm detection at 135°F. The W-H355R also provides Rate-of-Rise Detection at 15⁰F/min. The W-H355 and W-H355R communicate with the fire alarm control panel (FACP) through a wireless mesh network to the W-GATE wireless gateway. Note: Must be used with an ES-200X, ES-50X, MS-9600(UD)LS or MS-9200UDLS FACP.<div>&nbsp;</div><div class="productdocdivs"><a href="http://www.firelite.com/CatalogDocuments/DF-60833.pdf" class="productdocanchor">Datasheet</a></div><div class="productdocdivs"><a href="http://www.firelite.com/CatalogDocuments/I56-4082-000.pdf" class="productdocanchor">Manual</a></div><div class="productdocdivs"><a class="productdocanchor" href="http://www.firelite.com/en-us/Pages/Product.aspx?category=Wireless%20Fire%20Alarm%20Solution&cat=HLS-FIRELITE&pid=W-H355">Learn more</a></div>
W-H355 and W-H355R addressable, wireless heat detectors use a state-of-the-art thermistor sensing circuit for a fast response. The W-H355 and W-H355R provide fixed temperature alarm detection at 135°F. The W-H355R also provides Rate-of-Rise Detection at 15⁰F/min. The W-H355 and W-H355R communicate with the fire alarm control panel (FACP) through a wireless mesh network to the W-GATE wireless gateway. Note: Must be used with an ES-200X, ES-50X, MS-9600(UD)LS or MS-9200UDLS FACP.
 

W-MMF Wireless Addressable Monitor Module

W-MMF addressable, wireless monitor module is a standard-sized module that supervises either a Style D (Class A) or Style B (Class B) circuit of dry-contact input devices. It can be used for a variety of applications, such as monitoring conventional pull stations. This module is designed to supervise a circuit of dry-contact input devices on the fire alarm control panel (FACP). The W-MMF communicates with the FACP through a wireless mesh network to the W-GATE wireless gateway. Note: Must be used with an ES-200X, ES-50X, MS-9600(UD)LS or MS-9200UDLS FACP.<div>&nbsp;</div><div class="productdocdivs"><a href="http://www.firelite.com/CatalogDocuments/DF-60830.pdf" class="productdocanchor">Datasheet</a></div><div class="productdocdivs"><a href="http://www.firelite.com/CatalogDocuments/I56-4083-000.pdf" class="productdocanchor">Manual</a></div><div class="productdocdivs"><a class="productdocanchor" href="http://www.firelite.com/en-us/Pages/Product.aspx?category=Wireless%20Fire%20Alarm%20Solution&cat=HLS-FIRELITE&pid=W-MMF">Learn more</a></div>
W-MMF addressable, wireless monitor module is a standard-sized module that supervises either a Style D (Class A) or Style B (Class B) circuit of dry-contact input devices. It can be used for a variety of applications, such as monitoring conventional pull stations. This module is designed to supervise a circuit of dry-contact input devices on the fire alarm control panel (FACP). The W-MMF communicates with the FACP through a wireless mesh network to the W-GATE wireless gateway. Note: Must be used with an ES-200X, ES-50X, MS-9600(UD)LS or MS-9200UDLS FACP.
 

W-CRF Wireless Addressable Relay Module

The W-CRF Wireless Addressable Relay Module W-CRF addressable, wireless relay module is a standard-sized module that allows the fire alarm control panel (FACP) to switch discrete contacts. The relay contains an isolated set of Form-C contacts, which operate as a SPDT switch. The relay module can be used to activate functions such as a remote power supply (in conjunction with a monitor module), elevator recall, door holders and fan shutdown of wired devices or SWIFT devices within the same mesh network. Note: Must be used with an ES-200X, ES-50X, MS-9600(UD)LS or MS-9200UDLS FACP.<div>&nbsp;</div><div class="productdocdivs"><a class="productdocanchor" href="http://www.firelite.com/en-us/Pages/Product.aspx?category=Wireless%20Fire%20Alarm%20Solution&cat=HLS-FIRELITE&pid=W-CRF" style="float:right;">Learn more</a></div><div class="productdocdivs"><a href="http://www.firelite.com/CatalogDocuments/I56-8503-001.pdf" class="productdocanchor" style="float:right;">Manual</a></div><div class="productdocdivs"><a href="http://www.firelite.com/CatalogDocuments/DF-60830.pdf" class="productdocanchor" style="float:right;">Datasheet</a></div>
The W-CRF Wireless Addressable Relay Module W-CRF addressable, wireless relay module is a standard-sized module that allows the fire alarm control panel (FACP) to switch discrete contacts. The relay contains an isolated set of Form-C contacts, which operate as a SPDT switch. The relay module can be used to activate functions such as a remote power supply (in conjunction with a monitor module), elevator recall, door holders and fan shutdown of wired devices or SWIFT devices within the same mesh network. Note: Must be used with an ES-200X, ES-50X, MS-9600(UD)LS or MS-9200UDLS FACP.
 
SwiftPage
SWIFT Resources
Informative Technical
Sell Sheet Drawings
Overview Video Engineering Spec
Case Study: Vail Ski Championship Tech Bulletins
Value Calculator LED Indications (Gateway)
Product Images LED Indications (Detectors/Modules)
FAQ W-USB Adapter Upgrade Procedure
All SWIFT Firmware
Quick Start Guide SWIFT Tools
Link Test
Mesh Network Videos
RF Scan Technical How-To Series
Technical How-To Series
Archived Webinar SWIFT Wireless 2.0 & Applications
Applications
Tools
Lite Specs