Aug 11, 2020 Fire-Lite Alarms SWIFT Tools firmware version 4.1 has been released to enhance the network security of the SWIFT® wireless fire safety product line, as well as accommodate functionality with the new System Sensor L-Series line of low frequency sounder and sounder strobe notification appliances. It i...
|
|
Oct 31, 2019 Summary: Resolves a duct application issue when replacement sensor models SD365R(A) or SD365R(A)-IV are used with D355PL (A), DNR(A) or DNRW duct smoke detector models built prior to April 2014....
|
|
Jul 24, 2019 A non-safety issue has been identified with the Honeywell Power Products IPGSM-4G fire alarm communicator. The IPGSM-4G has a limited activation time of 180 days which, if not installed and activated within this timeframe, may prevent the IPGSM-4G from registering with AlarmNet or AT&T....
|
|
Jul 01, 2019
The Fire-Lite Endurance Series (ES) fire alarm control panels were designed to accept panel firmware updates by downloading the latest firmware file to a USB flash drive and by using the latest version of the FS-Tools programming software. Updating your panel to the latest released firmware is hig...
|
|