Honeywell Fire Systems has identified an issue that could affect the normal operation of BG-10 series pull stations manufactured from 1992 through 2010 and distributed under multiple brands including ADT, Fire-Lite Alarms, Johnson Control Inc. and NOTIFIER. The majority of the pull stations were manufactured from 1992 through 2000. For a list of potentially affected pull station model numbers and the recommended BG-12 series replacement model numbers, please review the table on page 2. You can find pictures of BG-10 series pull stations examples on page 3.

Fire-Lite Alarms is recommending a field update be performed to fire alarm control panels MS-9200UDLS Series and MS-9600UDLS Series to improve the System Sensor horn(s) synchronization action during a resound operation. When the fire control panel goes into an alarm resound, the notification circuit powers up the microprocessors in the System Sensor horns and then waits for them to be fully functional before sending the synchronization signal. This causes the first cadence or two of the Temporal 3 signal to sound slightly different.

Fire-Lite Alarms is recommending a field update be performed to fire alarm control panels MS-9200UDLS Series and MS-9600LS Series to improve initiating device action during water-flow operation.

The purpose of this document is to explain how the FireWatch(TM) IP Communicator and Visoralarm(TM) IP Receiver products can be deployed successfully in a code-compliant manner.

Fire-Lite Alarms is recommending a field update be performed to MS-9200UDLS, MS-9200UDLSC and MS-9200UDLSE panels with firmware V4.1 to improve communicator operation.  These products were shipped from the factory during November and December 2009 with date codes 4509 to 5009.

CP355 Addressable Ionization Smoke Detector

411 and 411UD

IPDACT