All Products

​​​​​​​​​​​​​​​​
SWIFT wireless addressable devices provide secure, reliable communication to the Fire Alarm Control Panel (FACP) across a class A ​mesh network. Great for applications where it is costly, obtrusive, or possibly dangerous to use traditional wired devices.​​

​​​​​​​​
<< 1 2 3 4 >>

D355PL Detector

Fire-Lite's InnovairFlex D355PL non-relay photoelectric duct smoke detector features a pivoting housing that fits both square and rectangular footprints capable of mounting to a round or rectangular duct. The InnovairFlex duct smoke detector senses smoke in the most challenging conditions, operating in air flow speeds of 100 to 4,000 feet per minute, temperatures of -4 degrees F to 158 degrees F, and a humidity range of 0 to 95 percent (non-condensing).
Fire-Lite's InnovairFlex D355PL non-relay photoelectric duct smoke detector features a pivoting housing that fits both square and rectangular footprints capable of mounting to a round or rectangular duct. The InnovairFlex duct smoke detector senses smoke in the most challenging conditions, operating in air flow speeds of 100 to 4,000 feet per minute, temperatures of -4 degrees F to 158 degrees F, and a humidity range of 0 to 95 percent (non-condensing).

E Series - Low-Profile Speakers and Strobes

Wheelock Series E Low Profile Speakers and Speaker Strobes are designed for high efficiency sound output, with dual voltage (25/70 VRMS) capability and field selectable taps from 1/8 to 2 watts. The low profile design incorporates a speaker mounting plate for faster and easier installation.
Wheelock Series E Low Profile Speakers and Speaker Strobes are designed for high efficiency sound output, with dual voltage (25/70 VRMS) capability and field selectable taps from 1/8 to 2 watts. The low profile design incorporates a speaker mounting plate for faster and easier installation.

ECC-125DA(E)

The ECC-125DA(E) are intelligent 125 watts amplifiers that are used with the ECC-50/100(E) emergency voice evacuation system. These distributed audio amplifiers amplify an audio message for distribution throughout a facility when additional audio power is required. They are designed as self-contained amplifiers and can be conveniently installed near an area of protection to reduce wiring demands for speaker circuit outputs.
The ECC-125DA(E) are intelligent 125 watts amplifiers that are used with the ECC-50/100(E) emergency voice evacuation system. These distributed audio amplifiers amplify an audio message for distribution throughout a facility when additional audio power is required. They are designed as self-contained amplifiers and can be conveniently installed near an area of protection to reduce wiring demands for speaker circuit outputs.

ECC-50/100

The ECC-50/100 and ECC-50/100E are multipurpose emergency voice evacuation panels that may be used for fire applications, mass notification applications or both. These state-of the-art Primary Operator Console’s (POC’s) are capable of producing either 50 or 100 watts of audio power that can be distributed to up to eight speaker circuits (i.e., zones).<br>
    <a href="http://www.firelite.com/en-US/Pages/ecc_support.aspx">Download the ECC App</a> </p>
The ECC-50/100 and ECC-50/100E are multipurpose emergency voice evacuation panels that may be used for fire applications, mass notification applications or both. These state-of the-art Primary Operator Console’s (POC’s) are capable of producing either 50 or 100 watts of audio power that can be distributed to up to eight speaker circuits (i.e., zones).
Download the ECC App

ECC-50DA (E)

The ECC-50DA(E) are intelligent 50 watts amplifiers that are used with the ECC-50/100(E) emergency voice evacuation system. These distributed audio amplifiers amplify an audio message for distribution throughout a facility when additional audio power is required. They are designed as self-contained amplifiers and can be conveniently installed near an area of protection to reduce wiring demands for speaker circuit outputs.
The ECC-50DA(E) are intelligent 50 watts amplifiers that are used with the ECC-50/100(E) emergency voice evacuation system. These distributed audio amplifiers amplify an audio message for distribution throughout a facility when additional audio power is required. They are designed as self-contained amplifiers and can be conveniently installed near an area of protection to reduce wiring demands for speaker circuit outputs.

ECC-FFT

The ECC-FFT is a firefighter telephone system that provides secure and reliable communications for firefighters. This standalone system is capable of providing supervision, annunciation and control for local and remote telephone handsets.
The ECC-FFT is a firefighter telephone system that provides secure and reliable communications for firefighters. This standalone system is capable of providing supervision, annunciation and control for local and remote telephone handsets.

ECC-LOC

The ECC-LOC is an optional Local Operator Console that is compatible with the ECC-50/100(E) Emergency Command Center for fire protection applications and mass notification. It is part of the family of external remote consoles that allows for extending the ECC-50/100(E) display and control to remote locations within a building.
The ECC-LOC is an optional Local Operator Console that is compatible with the ECC-50/100(E) Emergency Command Center for fire protection applications and mass notification. It is part of the family of external remote consoles that allows for extending the ECC-50/100(E) display and control to remote locations within a building.

ECC-RM

The ECC-RM is an optional Remote Microphone that is compatible with the ECC-50/100(E) Emergency Command Center for fire protection applications. It is part of the family of external remote consoles that allows for extending the operator interface to remote locations within a building.
The ECC-RM is an optional Remote Microphone that is compatible with the ECC-50/100(E) Emergency Command Center for fire protection applications. It is part of the family of external remote consoles that allows for extending the operator interface to remote locations within a building.

ECC-RPU

The ECC-RPU is an optional Remote Page Unit that is compatible with the ECC-50/100(E) Emergency Command Center for fire protection applications. It is part of the family of external remote consoles that allows for extending the ECC-50/100(E) display and control to remote locations within a building.
The ECC-RPU is an optional Remote Page Unit that is compatible with the ECC-50/100(E) Emergency Command Center for fire protection applications. It is part of the family of external remote consoles that allows for extending the ECC-50/100(E) display and control to remote locations within a building.

ECC-RTZM

The ECC-RTZM is an optional Remote Telephone Zone Module for use with the ECC-50/100 Emergency Command Center. The ECC-RTZM is allows secure access to the system via cell phone or other remote telephone means.
The ECC-RTZM is an optional Remote Telephone Zone Module for use with the ECC-50/100 Emergency Command Center. The ECC-RTZM is allows secure access to the system via cell phone or other remote telephone means.

ET Series - Low-Profile Speakers and Strobes

Wheelock’s high performance Series ET Speakers and Series ET Speaker Strobes provide high audio output, clear audibility, dual voltage (25/70 VRMS) capability and field selectable taps from 1/8 to 8 watts. They are designed to meet the critical needs of the life safety industry for effective emergency voice communications, tone signaling and visible signaling to alert the hearing impaired.
Wheelock’s high performance Series ET Speakers and Series ET Speaker Strobes provide high audio output, clear audibility, dual voltage (25/70 VRMS) capability and field selectable taps from 1/8 to 8 watts. They are designed to meet the critical needs of the life safety industry for effective emergency voice communications, tone signaling and visible signaling to alert the hearing impaired.

FCPS-24FS6

The FCPS-24FS6 from Fire-Lite Alarms is a compact, cost-effective, 6-amp remote NAC Extender power supply and battery charger. It is designed to extend the power capabilities of existing Notification Appliance Circuits (NAC’S) and support ADA requirements by offering NAC synchronization and auxiliary power to support 24-volt system accessories. It may be connected to any 12 or 24-volt Fire Alarm Control Panel (FACP) or it can be used for standalone applications.
The FCPS-24FS6 from Fire-Lite Alarms is a compact, cost-effective, 6-amp remote NAC Extender power supply and battery charger. It is designed to extend the power capabilities of existing Notification Appliance Circuits (NAC’S) and support ADA requirements by offering NAC synchronization and auxiliary power to support 24-volt system accessories. It may be connected to any 12 or 24-volt Fire Alarm Control Panel (FACP) or it can be used for standalone applications.

FCPS-24FS8

The FCPS-24FS8 from Fire-Lite Alarms is a compact, cost-effective, 8-amp remote NAC Extender power supply and battery charger. It is designed to extend the power capabilities of existing Notification Appliance Circuits (NAC’S) and support ADA requirements by offering NAC synchronization and auxiliary power to support 24-volt system accessories. It may be connected to any 12 or 24-volt Fire Alarm Control Panel (FACP) or it can be used for standalone applications.
The FCPS-24FS8 from Fire-Lite Alarms is a compact, cost-effective, 8-amp remote NAC Extender power supply and battery charger. It is designed to extend the power capabilities of existing Notification Appliance Circuits (NAC’S) and support ADA requirements by offering NAC synchronization and auxiliary power to support 24-volt system accessories. It may be connected to any 12 or 24-volt Fire Alarm Control Panel (FACP) or it can be used for standalone applications.

HPFF12

Honeywell Power’s HPFF12 is a 12-amp remote NAC Extender power supply and battery charger. It is designed to extend the power capabilities of existing Notification Appliance Circuits (NAC’S) and support ADA requirements by offering NAC synchronization and auxiliary power to support 24-volt system accessories. Some additional features include a trouble memory troubleshooting tool and a programmable End-of-line option for retrofit jobs.
Honeywell Power’s HPFF12 is a 12-amp remote NAC Extender power supply and battery charger. It is designed to extend the power capabilities of existing Notification Appliance Circuits (NAC’S) and support ADA requirements by offering NAC synchronization and auxiliary power to support 24-volt system accessories. Some additional features include a trouble memory troubleshooting tool and a programmable End-of-line option for retrofit jobs.

I300(A) Fault Isolator Module

Fire-Lite's I300(A) Fault Isolator Module is used with the MS-9050UD, MS-9200UDLS, and MS-9600(UD)LS to protect the system against wire-to-wire short circuits on the SLC loop. The I300(A) should be placed between each device on the SLC loop, to isolate a short-circuit problem between the modules.
Fire-Lite's I300(A) Fault Isolator Module is used with the MS-9050UD, MS-9200UDLS, and MS-9600(UD)LS to protect the system against wire-to-wire short circuits on the SLC loop. The I300(A) should be placed between each device on the SLC loop, to isolate a short-circuit problem between the modules.

IPDACT-2/2UD

The Fire-Watch™ series of IP Communicators from Fire-Lite Alarms are designed to transmit fire alarm system information to central monitoring stations over any standard IP network. They connect to a Fire Alarm control panel’s standard telephone ports with no changes required to panel’s existing configuration. These communicators offer exclusive upload/download capabilities, a 512 bit encryption for added security and a reliable connection to an off-site central station monitoring facility.
The Fire-Watch™ series of IP Communicators from Fire-Lite Alarms are designed to transmit fire alarm system information to central monitoring stations over any standard IP network. They connect to a Fire Alarm control panel’s standard telephone ports with no changes required to panel’s existing configuration. These communicators offer exclusive upload/download capabilities, a 512 bit encryption for added security and a reliable connection to an off-site central station monitoring facility.

IPGSM-4GC (CANADA ONLY)

Honeywell’s IPGSM-4GC is an IP and 4G fire alarm communicator (For Canada only) that offers contact ID reporting with any Fire Alarm Control Panel (FACP) that has a built-in dialer. This easy to install, dual path communicator connects directly to the primary and secondary communication ports of a Fire panel's Digital Alarm Communicator Transmitter (DACT). It offers three selectable reporting paths which include Cellular only, IP only, or IP primary/cellular backup.
Honeywell’s IPGSM-4GC is an IP and 4G fire alarm communicator (For Canada only) that offers contact ID reporting with any Fire Alarm Control Panel (FACP) that has a built-in dialer. This easy to install, dual path communicator connects directly to the primary and secondary communication ports of a Fire panel's Digital Alarm Communicator Transmitter (DACT). It offers three selectable reporting paths which include Cellular only, IP only, or IP primary/cellular backup.

LCD-80F

The LCD-80F is a compact, 80-character, backlit LCD remote Fire Annunciator for use with the Fire•Lite MS-9200 Series and MS-9600 Series Fire Alarm Control Panels (FACPs). The LCD-80F displays complete system point status information and includes control switches for remote control of critical system functions.
The LCD-80F is a compact, 80-character, backlit LCD remote Fire Annunciator for use with the Fire•Lite MS-9200 Series and MS-9600 Series Fire Alarm Control Panels (FACPs). The LCD-80F displays complete system point status information and includes control switches for remote control of critical system functions.

LDM-Series

The LDM Series Lamp Driver Modules, when combined with a custom graphic display, provide annunciation and control for the MS-9200, MS-9200UD, MS-9200UDLS, MS-9600, MS-9600LS and MS-9600UDLS Fire Alarm Control Panels. These modules use a serial communications interface, and may be located up to 6,000 feet from the panel.
The LDM Series Lamp Driver Modules, when combined with a custom graphic display, provide annunciation and control for the MS-9200, MS-9200UD, MS-9200UDLS, MS-9600, MS-9600LS and MS-9600UDLS Fire Alarm Control Panels. These modules use a serial communications interface, and may be located up to 6,000 feet from the panel.

MDL3 Sync Modules

The Sync•Circuit module synchronizes SpectrAlert® strobes at 1 Hz and horns at temporal 3 over a single pair of wires. Patented module technology also allows the silencing of horns and chimes on horn/strobe and chime/strobe models over a pair of wires.
The Sync•Circuit module synchronizes SpectrAlert® strobes at 1 Hz and horns at temporal 3 over a single pair of wires. Patented module technology also allows the silencing of horns and chimes on horn/strobe and chime/strobe models over a pair of wires.
SwiftPage
SWIFT Resources
Informative Technical
Sell Sheet Drawings
Overview Video Engineering Spec
Case Study: Vail Ski Championship Tech Bulletins
Value Calculator LED Indications (Gateway)
Product Images LED Indications (Detectors/Modules)
FAQ W-USB Adapter Upgrade Procedure
Quick Start Guide SWIFT Tools
Link Test
Mesh Network Videos
RF Scan Technical How-To Series
Archived Webinar SWIFT Wireless 2.0 & Applications
Applications
Tools
Lite Specs